Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Ai Joe Quinn was strong as an ox but no dirt in him. I thought your strong minor teams were pre 98 but can't recall exactly - if I were to guess I would say 96. I can't find a wiki or anything with years for who won the minors.
I wonder whats the plan tonight if draw after ET?
A small switch - https://www.amazon.co.uk/NETGEAR-Ethernet-Unmanaged-Internet-Splitter/dp/B07PYSNSDD/ref=sr_1_5?keywords=3+port+switch&qid=1567421528&s=gateway&smid=A3P5ROKL5A1OLE&sr=8-5Thanks. Will get a lookAny such thing as getting a firestick with an Ethernet port rather that relying on WiFi?
Yes there is an adapter you can buy here or check ebay etc for cheaper copies
https://www.amazon.co.uk/Amazon-Ethernet-Adaptor-Remote-models/dp/B01LXP5TXI
Can you get anything split a Cat 5 or 6 cable to feed 2 sources i.e one data point to feed the TV and firestick both hard wired?
I have another one here in house. Extra toilet delivered when building and never collected again.Your ball-c**k is possibly set too high as it knocks off the inlet once the water reaches a certain level. There should be a plastic threaded bolt at the ball-c**k hinge that allows to to set how can much water to come into the cistern.As soon as i touched that thread at the right the water started coming in again without it flushing.
I screwed it well down and flushed and can see it clearly go and and then raise up as the water fills up - but the water just keeps filling even when it goes as high as it can go.
Is that unit faulty?
Have you tried screwing it in the opposite direction?
Yep tried it at max both ways and the water just kept flowing.
What is that unit called? A fill valve?
flush valve is what we'd call it. Show the pic in your plumbers merchants and they should be able to sort you
It's a fill valve. The flush valve is the siphon. Looks like a bottom entry fill valve to me.
Your ball-c**k is possibly set too high as it knocks off the inlet once the water reaches a certain level. There should be a plastic threaded bolt at the ball-c**k hinge that allows to to set how can much water to come into the cistern.As soon as i touched that thread at the right the water started coming in again without it flushing.
I screwed it well down and flushed and can see it clearly go and and then raise up as the water fills up - but the water just keeps filling even when it goes as high as it can go.
Is that unit faulty?
Have you tried screwing it in the opposite direction?
Yip, replace it...cheap as chips £15 - £20It should clip off near the top somewhere?
Should just clip in and out easily enough
Your ball-c**k is possibly set too high as it knocks off the inlet once the water reaches a certain level. There should be a plastic threaded bolt at the ball-c**k hinge that allows to to set how can much water to come into the cistern.As soon as i touched that thread at the right the water started coming in again without it flushing.
The real problem is that St Pauls proposal is a good one, but done for the wrong reasons. I think if it were implemented this year coming they'd have to be some sort of playoff so the likes of St Pats aren't shafted. But who wants to play a crucial game to define their year before anythings started.It could be implemented but taken into account the finishing positions with promotion/relegation taking place before being applied.
Does anyone have full u21 line up fixtures etc or is there a link to it anywhere?
