Author Topic: DIY thread  (Read 12772 times)

JoG2

  • Hero Member
  • *****
  • Posts: 4497
    • View Profile
Re: DIY thread
« Reply #75 on: March 02, 2021, 10:56:32 AM »
Anyone got recommendations for dealing with mould on a garden shed roof. Im positive its not leaking, I think the moisture was in the wood at the time of building. I've seen anti mould paint, should I just go ahead and give the roof a coat or would there be anything else needed before this?

Roof or celing majestic? I've used anti mould paint on a shed ceiling (hardwood) before, good job. Haven't had to reapply in over a year

Ceiling, what brand did you go for?

https://www.rawlinspaints.com/home/exterior-masonry-paints/368-rust-oleum-mathys-murfill-renovation-paint.html

This is what I used, on the recommendation of a builder. Says exterior, but worked a treat, and still is.
« Last Edit: March 02, 2021, 07:39:47 PM by JoG2 »

JoG2

  • Hero Member
  • *****
  • Posts: 4497
    • View Profile
Re: DIY thread
« Reply #76 on: March 04, 2021, 11:22:08 AM »
Anyone got recommendations for dealing with mould on a garden shed roof. Im positive its not leaking, I think the moisture was in the wood at the time of building. I've seen anti mould paint, should I just go ahead and give the roof a coat or would there be anything else needed before this?

Roof or celing majestic? I've used anti mould paint on a shed ceiling (hardwood) before, good job. Haven't had to reapply in over a year

Ceiling, what brand did you go for?

https://www.rawlinspaints.com/home/exterior-masonry-paints/368-rust-oleum-mathys-murfill-renovation-paint.html

This is what I used, on the recommendation of a builder. Says exterior, but worked a treat, and still is.

Majestic

gawa316

  • Hero Member
  • *****
  • Posts: 4252
    • View Profile
Re: DIY thread
« Reply #77 on: May 15, 2022, 02:12:50 AM »
Just got a new washing machine (still have the older one), the newer one has a bigger capacity and after the first wash the waste water couldn't get away quick enough and pished out all over the place. Waste pipe on new washer is 1.5 in and 1in in the old one.

Any idea what can be done? Other than put the old ones back in